Guidelines for Split Air Conditioning Installation: Why Your AC Bracket Matters?

17 September 2020

Many properties are now embracing split air conditioning unit because of its features and capabilities. This type of air conditioner is primarily composed of a compressor that is located outside and an air outlet unit that is installed inside a room or property. Split air conditioning unit does not have to be connected to ductwork. Instead, it relies heavily on pipes so that both outdoor and indoor parts are interconnected.

One element that can affect the performance and efficiency of a split air conditioning unit is its installation. A unit that is installed correctly can easily give the needed cooling of an area. Alternatively, it can be difficult for the unit to provide the needed cooling if its installation is done poorly.

Split Air Conditioning Installation

There are several factors that one must consider during the installation of split air conditioning units. Some of these factors are:

• Wall Strength: Usually, the indoor air outlet unit is attached to the wall. Therefore, it is important that the wall is strong enough to handle and hold the weight of the unit. 
• Spacing and Elevation: Another factor that must be considered is the spacing between the indoor unit and the wall. The recommended space between the indoor unit and the surrounding walls must be at least 15 cm. Additionally, the same unit must be installed at least 7 to 8 feet above the ground. These dimensions allow the air conditioning unit to provide the needed airflow.
• Tilt Angle: For indoor unit installation, the angle of the brackets on the wall must be tilted slightly. This slight tilt can provide an unrestricted flow of the condensed water from the unit.
• Surrounding Elements: Both outdoor and indoor units need to be installed away from direct sunlight and water so that they can provide optimal cooling to the property.
• Outdoor Unit Location: Any heat dissipated from the condenser must also be released freely, which is why the outdoor unit must be installed in an open space. Additionally, the outdoor unit must be installed on a flat and rigid surface so that its components will not vibrate excessively.
• Distance of Units: The distance between the outdoor and indoor units must be kept as minimum as possible so that the heat loss will be reduced significantly. The maximum distance between these units that will not compromise heat loss would be around 15 meters.

Air Conditioner Bracket is Important

One component that is important for the installation process of split air conditioning is the bracket. Air conditioner (AC) brackets are important since they can effectively hold units that weigh more than 45 kg. They can also ensure that the indoor unit can work steadily without the risk of suddenly falling. These brackets also ensure that the unit can have sufficient airflow that it needs for cooling a specific area.

AC brackets tend to differ when it comes to their configuration, but they can guarantee to support the indoor unit of a split air conditioning unit easily. Most brackets come in a small shelf of a pair of legs that may extend slightly outside the window. Some AC brackets may not even require screws for installations.

Optimized by: Netwizard SEO