A Review of the Quick Installation Guide of Split Ezy Pro AC Brackets

07 March 2023

A split air conditioning unit can work best with your property if you want to minimise energy use. You can even save more money once you opted for one with inverter technology. Another benefit of this unit is it operates quietly. The quiet operation of this unit can be contributed to its form factor, with slightly loud components being placed on the outdoor unit. The indoor component then remains quiet throughout its operations.

Now, when installing the indoor component of your split air conditioner, you must ensure that it will be placed on your wall properly. It should also be at a decent height to provide cool air to your entire room.

Proper Installation of a Split Air Conditioner

One thing that can affect the performance of your split air conditioner is the way its components are installed. As mentioned earlier, a split air conditioner has two separate components. The outdoor component is meant to release the absorbed latent heat to the surroundings. 

The indoor component, alternatively, is responsible for providing cooled air into your room. To make it effective, it should be mounted on your wall with proper brackets.

Once installed, you must regularly inspect, clean, and maintain both components.

Maximise the Advantages of a Split Ezy Pro AC Brackets

When installing the indoor component of your split air conditioner, you should ensure that you only go for a long-lasting and reliable bracket. The Split Ezy Pro, fortunately, can be your perfect companion for installing the said component of your split air conditioner.

The Split Ezy Pro is a protective and time-saving installation bracket that is perfect for most split air conditioning units. This bracket can protect pipes, drains, and cables from theft and external damage during construction. This quality eliminates the need to repair rough-in at the fit-off stage of the unit. It also allows your bracket to install the indoor component on plaster-battened walls with a cavity as small as 40mm.

For an easy location of pipes behind finished wall lining, this bracket features a visual datum point. Ultimately, it is easy to install and can achieve consistent time and cost savings.

Proper Installation of Split Ezy Pro Bracket

Before installing the Split Ezy Pro, the installer needs to wear personal protective equipment like gloves and safety glasses. 

The first step in installing this bracket is to measure it. The installer will measure the bracket that will be used to mark the stud. They must then cut the stud out, leaving enough room for the bracket. Subsequently, the Split Ezy Pro bracket should sit flush with the front of the studs. The installer must, alternatively, bend the datum spike and the tabs of the bracket out.

Pipes should be installed on your bracket optimally. Hence, the installer should cut some parts of the bracket. Once done, they should dress the pipes and cable into the Split Ezy Pro bracket before bending the tabs back. Plastering over the bracket should then be done so that the datum spike can penetrate it. They must then use the datum spike as a guide in levelling and marking templates. The plaster must then be cut out to suit your brand. 

The tabs must then be pushed while the pipes should be pulled out. The air conditioner bracket must be also fixed with self-tapping screws, while the pipes should be cut. Once these things are done, the unit can now be installed.

Contact us now if you want to purchase this bracket.

Optimized by: Netwizard SEO